|Type of Product:
||Balboa electronic control pack with paired topside control
||Balboa GS100 control box (NEW VERSION IN BLACK COLOUR) and Balboa Mini Oval LCD 3 Button topside control
||Pump 1: Dual speed pump 1
Air Blower: N/A
Heater: x 1 2kW, Heater is a separate unit which plugs into the board.
Ozone: x 1 (230vac)
Light: x1 12 volt
Radio, TV/AV: Point available
||Any retrofit system, suitable for upgrades
||1.5-inch socket heater union sleeves. Amp cables plug onto the PCB to operate the components.
||Length: 215 mm
Width: 73 mm
Height: 133 mm
Topside: 110 mm x 40 mm
Length of heater with unions: 375 mm
||Jets, Temp and Light
||1 x Balboa Mini Oval LCD 3 BUTTON, 1 x Balboa 2.0KW Heater M7 (For new GS100), 1 x (Box 1.1) Balboa GS100 Control System Complete (new style), 1 x 2 pin Amp cord (light), 1 x 3 pin Amp cord, 1 x 4 pin Amp cord and Wire Grommit
Touch pad not to scale, please check details below to confirm compatibility
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
- *FREE CABLE PACK* this includes...
- 1 x 4 pin cable (2-speed pump)
- 1 x 3 pin cable (1-speed pump, blower or ozone)
- 1 x 2 pin cable (Spa light)
As this is only a 2.0kW system this makes it a useful entry-level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.